Products3933 Products
$100.00
Original Cannondale Hollowgram spider for standard 135mm BCD. This spider is specific for pre-2011 Campy (Campagnolo) chainrings and will not work on 2011 Campy rings. Includes chainring bolts. One of the greatest features about Cannondale's Hollowgram is the ability to change every single part separately. Road or mountain, your Hollowgram...
-23%
$100.00
$130.00
This new spider allows for the smaller 38/24T configuration chairings with the 104/64 BCD. Spider supports any of the 104/64 BCD chainrings and must be used with SRAM/TruVativ XX chainring bolts. View similar items in these related categories Chainrings + Spiders > 104/64 BCD Chainrings Chainrings + Spiders > Hollowgram...
$27.00
Original alloy Cannondale lockring used to fasten the spider to the crankarm on Hollowgram cranks. Compatible with all Cannondale BB30 Hollowgram cranks, and was redesigned to fit Evo's press-fit bottom bracket. If you have an Evo you need this lockring, because the old one does not fit. Kit includes one...
$40.00
Original Cannondale Hollowgram spider lockring install/removal tool. This shop-quality tool is required to remove or install the lockring that keeps the spider securely fastened to the drive-side crankarm. This version 2 is thinner and has a better interface for putting a big wrench on it for leverage. Tool has both...
Out of stock
Original Cannondale Hollowgram spider for SRAM XX and other 2X10 systems. Spider supports any of the 80/120mm BCD chainrings and must be used with SRAM/TruVativ XX chainring bolts. One of the greatest features about Cannondale's Hollowgram is the ability to change every single part separately. Road or mountain, your Hollowgram...
$130.00
Original Cannondale Hollowgram spider for SRAM XX and other 2X10 systems. Extremely rare black color came on Scalpel Ultimate and Flash Ultimate and has never been available aftermarket. Spider supports any of the 80/120mm BCD chainrings and must be used with SRAM/TruVativ XX chainring bolts. One of the greatest features...
Out of stock
Cannondale Hollowgram mountain spider with Ai offset for 2x10 drivetrain with 64/104 BCD. Allows for smaller chainrings for more gearing. View similar items in these related categories Chainrings + Spiders > 104/64 BCD Chainrings Chainrings + Spiders > Hollowgram Spiders + Lockrings Today's Stock Status Currently not availableUPC: 884603599020 EAN:...
-17%
$120.00
$145.00
New spider for the Cannondale Hollowgram to make it compatible to run the SRAM XX1 drive train. View similar items in these related categories Chainrings + Spiders > 76mm BCD Chainrings Chainrings + Spiders > Hollowgram Spiders + Lockrings Today's Stock Status 1 Ready to ship or pickup ASAP from...
-20%
$60.00
$75.00
Relax in style. Semi-fitted Kangaroo pockets Full front zip Drawstring w/Cannondale logo tips
View similar items in these related categories
Clothing + Apparel > T-shirts + Casual Tops
Today's Stock Status
2 Ready to ship or pickup ASAP from Utah
UPC: 884603433751 EAN: Not available Manufacturer Part Number: 2M143S/BLK 711367-Q2-L39B01
Out of stock
Original Cannondale Hooligan seatpost in 31.6mm diameter. Extra long 520mm length specifically made for the Cannondale Hooligan frames. Can be cut to fit as needed. Weight is approximately 490 grams. View similar items in these related categories Seatposts > 31.6mm Seatposts Today's Stock Status Currently not availableUPC: 884603559345 EAN: Not...
$120.00
The Hunter from Cannondale is designed for the rider wanting a well ventilated, light weight, yet durable helmet. Built for fast descent’s and long technical climbs, with a fit that feels just right and an modern look. This is the perfect helmet for hard-core trail riders, racers and those wanting...
$120.00
The Hunter from Cannondale is designed for the rider wanting a well ventilated, light weight, yet durable helmet. Built for fast descent’s and long technical climbs, with a fit that feels just right and an modern look. This is the perfect helmet for hard-core trail riders, racers and those wanting...
$20.00
The Lefty Hybrid 32 Moto Guard protects the inner tube surface from damage. It also supports the brake line. Check it periodically. Make sure it is in good condition and attached properly. View similar items in these related categories Lefty + Headshok Parts > Lefty Moto Guards Today's Stock Status...
$50.00
Brake adapter for 27.5 wheelsize SuperMax forks with a standard Lefty hub. Fits 180mm rotors. View similar items in these related categories Brakes + Brake Parts > Lefty Specific Brake Adapters Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603588352 EAN: Not available Manufacturer Part...
Out of stock
Original Cannondale Lefty Hybrid outer race retainer tool. This tool is used to hold the outer races in place while servicing the Lefty telescope. Kit includes tool with two rubber pieces for 32 and 36mm Lefty structures. View similar items in these related categories Tools > Lefty + Headshok Tools...
$50.00
Brake adapter for 27.5 wheelsize SuperMax forks with the SuperMax hub. Fits 180mm rotors. View similar items in these related categories Brakes + Brake Parts > Lefty Specific Brake Adapters Today's Stock Status 2 Ready to ship or pickup ASAP from Utah UPC: 884603588345 EAN: Not available Manufacturer Part Number:...
$12.00
Original Cannondale guides for hydraulic hoses or derailleur housing. Used on all kinds of bikes including Bad Boy, Rush, Prophet, Rize, and many others. This kit includes ten cable guides. View similar items in these related categories Cable Management > Frame Cable Guides + Stops Today's Stock Status 10+ Ready...
$6.00
Original Cannondale guides for hydraulic hoses or derailleur housing. Used on all kinds of bikes including Bad Boy, Rush, Prophet, Rize, and many others. This kit includes four cable guides. View similar items in these related categories Cable Management > Frame Cable Guides + Stops Today's Stock Status 10 Ready...
Out of stock
Flyweight fabrics. Heavyweight performance. Hydrono fabric turns back water, but passes perspiration Fitted Soft, lined collar boosts all-day comfort Back pocket for tools and fuels Reflective accents improve visibility Hydrophyllic DWR treatment Contents: 100% polyester Today's Stock Status Currently not availableUPC: 884603432655 EAN: Not available Manufacturer Part Number: 2M310S/CLR 711383-Q0-L...
Out of stock
The triple-layer thermal isolation technology keeps your drink cooler over twice as long as conventional water bottles Fill it with ice and your favorite drink, or freeze it overnight No-leak, hi-flow nozzle delivers 30% more flow than conventional caps Bottle is BPA- and phthalate-free, printed with non-toxic inks Dishwasher safe,...
$35.00
Original Cannondale Intellimount kit used to attach a phone or other device to a compatible Cannondale Intellimount stem. Kit includes one self-adhesive device mount, one microrail adhesive mount, one stand tool, and one Intellimount adapter to mount to compatible stems. Intellimount accessories are made by and compatible with other SP...
Out of stock
SP Connect self adhesive mount for your phone which connects to Cannondale's Intellimount stems and SP Connect accessories. Kit includes one slim self adhesive mount, one small kickstand, cleaning alcohol, and instructions. Does not include hardware to mount to stems. That kit is sold separately. View similar items in these...
Out of stock
Many of Cannondale's stems include support for SP Connect accessories using the Intellimount system. Compatible stems have three holes horizontally across the top, the middle is threaded. Other phone cases, mounts, and accessories are available separately. Kit includes one stem mount and one mounting bolt Stem not included View similar...
$160.00
The Intent is created for enduro stage wins and all-day adventures. Keeping riders cool and confident thanks to the 13 massive air channelling vents and deep rear coverage. Goggle compatibility and dual shell design gives the enduro rider everything they need in a modern helmet. The Intent will give the...
$160.00
The Intent is created for enduro stage wins and all-day adventures. Keeping riders cool and confident thanks to the 13 massive air channelling vents and deep rear coverage. Goggle compatibility and dual shell design gives the enduro rider everything they need in a modern helmet. The Intent will give the...
Out of stock
Brake Stop Guide for Slice, Synapse, and Evos 48-50cm frames
View similar items in these related categories
Cable Management > Frame Cable Guides + Stops
Today's Stock Status
Currently not availableUPC: 680655433936 EAN: Not available Manufacturer Part Number: KP063/ 711052-Q0-L
-67%
Out of stock
Original Cannondale IQ100 computer replacement mounting kit. Use this kit on a second bike or replace a damaged sensor or mount. Kit includes mounting bracket, wire with sensor, zip ties, and spoke magnet. Will not work with other IQ computer models. Today's Stock Status Currently not availableUPC: 884603500934 EAN: Not...
-55%
Out of stock
Includes all necessary hardware to mount your Cannondale IQ200 Cycling Computer Includes: Head unit mounting bracket Front wheel sensor unit Non slip mount bracket and wheel sensor pads Wheel magnet assembly Cable ties for mounting bracket and securing sensor wire Instruction sheet Today's Stock Status Currently not availableUPC: 884603500941 EAN:...
-10%
$45.00
$50.00
Original Cannondale headset for tapered headtubes with integrated bearings. Kit includes: conical upper bearing cover, aluminum upper bearing wedge, IS42 upper bearing, IS52 lower bearing, and 40mm crown race. View similar items in these related categories Headsets > IS42 Headsets Headsets > IS52 Headsets Today's Stock Status 1 Ready to...
$37.00
Original Cannondale derailleur hanger that fits 2018 model year Jekyll and Trigger, and the new 2021 Jekyll mountain bikes threaded 12mm axles. Includes mounting bolt. View similar items in these related categories Derailleur Hangers > Derailleur Hangers Today's Stock Status 10+ Ready to ship or pickup ASAP from Utah UPC:...
Out of stock
Original Cannondale Jekyll 27.5 2011-2016 replacement link hardware.
View similar items in these related categories
Frame Parts > Suspension Frame Pivot Hardware
Today's Stock Status
Currently not availableUPC: 884603362969 EAN: Not available Manufacturer Part Number: KP184/BLK 711155-Q0-L17B02
$85.00
Original Cannondale Jekyll 2011-2016 replacement bearings for rear suspension pivot. Kit includes 10 pivot bearings View similar items in these related categories Frame Parts > Suspension Frame Pivot Hardware Today's Stock Status 3 Ready to ship or pickup ASAP from Utah UPC: 884603362983 EAN: Not available Manufacturer Part Number: KP185/...
$65.00
Update: Kit has been updated to only include main pivot bearings and chainstay bearings. No longer includes shock link bearings. Complete original Cannondale suspension pivot bearing replacement kit for 2018 generation Jekyll 27.5 frames. Kit includes: 2 main pivot bearings 4 chainstay pivot bearings (2 used per side) 4 shield...
$25.00
Replacement cable guides for the downtube of the 27.5 Jekyll Carbon frames only (not Jekyll Alloy), Bad Habit, Habit, and others. Kit includes four rubber guides, four alloy plates, and four bolts. View similar items in these related categories Cable Management > Frame Cable Guides + Stops Today's Stock Status...
Out of stock
Original Cannondale Jekyll 27.5 shock link w/ bearings. Fits all 2018 generation Jekyll 27.5 bikes in all sizes. Kit includes carbon shock link, four preinstalled bearings, and two spacers Weighs 237 grams as pictured with bearings and spacers View similar items in these related categories Frame Parts > Cannondale Frame...
$95.00
Original Cannondale Jekyll 29 shock link w/ bearings. Fits all 2019 generation Jekyll 29 bikes in all sizes. Weighs 293 grams as pictured with bearings and spacers View similar items in these related categories Frame Parts > Cannondale Frame Shock Links Today's Stock Status 1 Ready to ship or pickup...
$25.00
Cannondale frame protection for your Jekyll Alloy. This rubber protector sticks onto your chainstay to prevent scratches and chips from a bouncing chain and also reduce the chain slap noise. View similar items in these related categories Frame Protection > Cannondale Frame Protectors Today's Stock Status 1 Ready to ship...
Out of stock
Original Cannondale shock link for 2011+ LARGE and EXTRA LARGE Alloy Jekyll frames.
View similar items in these related categories
Frame Parts > Cannondale Frame Shock Links
Today's Stock Status
Currently not availableUPC: DOES NOT APPLY EAN: Not available Manufacturer Part Number: 1WVNALK/LX/WHT 711293-Q0-L16i08
$25.00
Cannondale frame protection for your Jekyll Carbon. This rubber protector sticks onto your chainstay to prevent scratches and chips from a bouncing chain and also reduce the chain slap noise. View similar items in these related categories Frame Protection > Cannondale Frame Protectors Today's Stock Status 1 Ready to ship...
$20.00
Front derailleur spacer mount for the current model Jekylls.
View similar items in these related categories
Derailleur Hangers > Derailleur Hangers
Today's Stock Status
2 Ready to ship or pickup ASAP from Utah
UPC: 884603362990 EAN: Not available Manufacturer Part Number: KP186/ 711593-Q2-L14EE02
$20.00
Cannondale Jekyll Sag Indicator Kit - KP188/ Measure the amount of sag and travel used in the rear suspension of your Jekyll. View similar items in these related categories Frame Parts > Suspension Frame Pivot Hardware Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603406946...
$28.00
Original Cannondale heel rub protection kit for 2017 generation Jekyll/Trigger frames with alloy rear triangle. Four custom cut 3M protection pieces to protect your frame against damage from regular riding. View similar items in these related categories Frame Protection > Stick On Frame Protection Today's Stock Status 1 Ready to...
$25.00
Original Cannondale heel rub protection kit for 2017 generation Jekyll/Trigger frames with carbon rear triangle. Four custom cut 3M protection pieces to protect your frame against damage from regular riding. View similar items in these related categories Frame Protection > Stick On Frame Protection Today's Stock Status 1 Ready to...
Out of stock
Good shifting requires a straight, stiff derailleur hanger. Aftermarket hanger is 100% compatible with Cannondale bikes. Cannondale strongly advises not trying to straighten hangers by bending with a hanger alignment tool. Kit includes one derailleur hanger and the two tiny screws. Those screws take a 2.5mm hex wrench at installation....
$70.00
Original Cannondale tool kit for installation and removal of bearings used in Kingpin pivots. Kingpin is found on Topstone gravel bikes. View similar items in these related categories Tools > Suspension Tools Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603791356 EAN: Not available Manufacturer...
-80%
Out of stock
Today's Stock Status
Currently not availableUPC: 884603500958 EAN: Not available Manufacturer Part Number: MK2IQ300 711901-Q0-L
$12.00
Original Cannondale Di2 battery holder for KNOT 27 seatposts used on 2020 generation SuperSix EVO and CAAD13 bikes. Kit includes one Di2 battery holder. Di2 battery is not included. View similar items in these related categories Seatposts > Non-Round Seatposts Today's Stock Status 7 Ready to ship or pickup ASAP...
$40.00
Original Cannondale seatpost rail clamps and hardware for KNOT 27 carbon and aluminum seatposts found on 2020 generation SuperSix EVO and EVO NEO bikes. Kit includes upper and lower rail clamp plates, two bolts, and two barrel nuts. Bolts adjust with 4mm hex wrench. View similar items in these related...
