Thru Axles + Skewers36 Products
$45.00
Rear axle for 2018 generation Synapse Carbon Disc frames. 142x12 axle spacing w/ repositionable lever for tool free use. View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status 2 Ready to ship or pickup ASAP from Utah UPC: 884603705445 EAN: Not available...
$55.00
Original Cannondale rear thru axle. Fits 2020 generation SuperSix EVO Disc, 2019 generation SystemSix, and 2020 generation CAAD13 frames. Lever can be repositioned to the ideal location. Double lead threads 142mm axle spacing 12mm diameter 1.0 thread pitch 165mm length from flat to end of axle View similar items in...
$55.00
Original Cannondale Speed Release rear axle. Check your owner's manual supplement for compatibility. Minimal no-lever design uses a 6mm hex wrench to install/remove. Double lead threads 142mm axle spacing 12mm diameter 166mm length from flat to end of axle View similar items in these related categories Frame Parts > Thru...
$45.00
Syntace X12 Rear Axle Fits Jekyll 2, Claymore, and Scalpel 29erInstalls with 5mm hex wrench View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status 3 Ready to ship or pickup ASAP from Utah UPC: 884603362907 EAN: Not available Manufacturer Part Number: KP190/...
$40.00
Original Cannondale front thru axle for Speed Release forks. Fits 2019 generation SystemSix, 2019 generation SuperSlice, 2020 SuperSix Evo Disc, and 2020 generation SuperSix Evo Neo. Lever can be repositioned to the ideal location. Double lead threads 100mm axle spacing 12mm diameter 119mm length from flat to end of axle...
$45.00
Original Cannondale front thru axle. Fits 2018 generation Synapse Carbon, 2019 generation Synapse Alloy, 2019 generation CAADX, 2019 generation Topstone Alloy, 2020 generation Quick, 2019 generation Synapse Neo, and 2020 generation Quick Neo SL. Lever can be repositioned to the ideal location. Single lead threads 100mm axle spacing 12mm diameter...
Out of stock
The skewer is a little bit longer than normal and has two spacers on it for clearance on hooded dropouts. This skewer is a must have if you can't get your bike on the trainer because the trainer touches the frame. Use one or both spacers as needed.Also allows you...
$40.90
- Ratchet Wheelmounting System (RWS), 100% Swiss made - Up to 50% more clamping force than a common quick release - Safe and easy to use: tighten up the system by turning the lever clockwise by hand as firm as possible (min. 15 Nm hand force) - Multi-position lever with...
$54.00
- Zwift users rejoice, the perfect solution for modern thru-axle bikes and modern bike trainers - Axle trainer attachments are removable so the trainer axle can be used on or off the trainer. Excellent for warm-up applications - No special tools required for installation and removal, a simple 5mm hex...
$45.00
Cannondale specialty 214mm thru axle meant to accomiate the five inch tire on the Cannondale Fat CAAD. View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603639979 EAN: Not available Manufacturer Part...
-13%
Out of stock
Original Cannondale rear axle for frames using Syntace X12 axles. This axle is used on 2024 SuperSix EVO, Synapse Carbon, Synapse Alloy, Topstone Carbon, Topstone Alloy, and other frames using Syntace axles with 142mm axle spacing. Kit includes one axle as pictured. 5mm hex wrench interface on both sides. View...
Out of stock
Original Cannondale quick release skewer for frames with 141mm rear wheel spacing.
View similar items in these related categories
Frame Parts > Thru Axles + Skewers
Today's Stock Status
Currently not availableUPC: 884603775899 EAN: Not available Manufacturer Part Number: K83039 713719-Q0-L40C06
Out of stock
RockShox rear Maxle bolt on for Cannondale Habit. 142x12 rear axle.
Overall length: 174mm
Thread Pitch: 12x1.75mm
Weight: 37 grams
View similar items in these related categories
Frame Parts > Thru Axles + Skewers
Today's Stock Status
Currently not availableUPC: 710845798528 EAN: Not available Manufacturer Part Number: 00.4318.005.027 712382-Q0-L19EE05
$50.00
Maxle front axle for Cannondale 2017+ SuperX thru axle. 5mm hex wrench interface is simple, clean, and lightweight. Kit inclues one axle as pictured. View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status 2 Ready to ship or pickup ASAP from Utah...
-6%
$33.00
$35.00
Original Cannondale thru axle for 142mm Speed Release frames with Double Lead threads. Fits 2020 generation Topstone Carbon forks. Minimal no-lever design uses a 6mm hex wrench to install/remove. Double lead threads 100mm front axle spacing 12mm diameter 119mm from flat to end of axle View similar items in these...
$60.00
RockShox rear Maxle with quick release lever for Cannondale Habit. 142x12 rear axle. Overall length: 174mm Thread Pitch: 12x1.75mm Weight: 74 grams View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status 3 Ready to ship or pickup ASAP from Utah UPC: 710845656187...
-9%
$41.00
$45.00
Original Cannondale rear thru axle for Speed Release frames. Fits 2021 generation Scalpel frames, may fit others. No lever style for a clean, lightweight setup. Single lead threads 148mm axle spacing 12mm diameter 176mm length from flat to end of axle View similar items in these related categories Frame Parts...
-7%
$40.90
$43.99
- Ratchet Wheelmounting System (RWS), 100% Swiss made - Up to 50% more clamping force than a common quick release - Safe and easy to use: tighten up the system by turning the lever clockwise by hand as firm as possible (min. 15 Nm hand force) - Multi-position lever with...
$42.00
- Lightweight thru-axles, providing a better alternative to stock axles - Low profile design with a clean appearance - Machined to the highest standards in the industry - Not compatible with trailers or trainers - Use The Robert Axle Finder(below) to find the correct axle - When multiple axle lengths...
$48.00
- Lightweight thru-axles, providing a better alternative to stock axles - Low profile design with a clean appearance - Machined to the highest standards in the industry - Not compatible with trailers or trainers - Use The Robert Axle Finder(below) to find the correct axle - When multiple axle lengths...
$42.00
- Lightweight thru-axles, providing a better alternative to stock axles - Low profile design with a clean appearance - Machined to the highest standards in the industry - Not compatible with trailers or trainers - Use The Robert Axle Finder(below) to find the correct axle - When multiple axle lengths...
$48.00
The Lightning Bolt-On Axles offer a low profile and lighter weight alternative to conventional thru axles with levers. Available front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile and lighter weight option to replace your stock thru-axles No more bulky handles to strike trail obstacles. Aerodynamic...
Out of stock
Original Cannondale thru axle for 142mm Speed Release frames with Double Lead threads. Fits 2020 generation Topstone Carbon frames Minimal no-lever design uses a 6mm hex wrench to install/remove. Double lead threads 142mm rear axle spacing 12mm diameter 165mm from flat to end of axle View similar items in these...
$48.00
- Lightweight thru-axles, providing a better alternative to stock axles - Low profile design with a clean appearance - Machined to the highest standards in the industry - Not compatible with trailers or trainers - Use The Robert Axle Finder(below) to find the correct axle - When multiple axle lengths...
$75.00
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system. Product Specifics Axle Diameter (mm): 12 Over Locknut (mm): 148 Weight: 76 Thread Length (mm): 20 Overall Length (mm): 180 Color: Black Thread Pitch: 1.75 View...
Out of stock
- Quick-release style lever integrated into an end-threaded thru-axle assembly for Maxle compatible frames - Hard anodized 7075 aluminum construction with a 360-degree lever-clocking design - Overall Length (OL) dimensions are from the axle side of the shoulder to the end of the threads (12x142mm versions have different OL dimensions...
$39.95
- Replaces QR thru-axles for a simple, lightweight and stiff alternative compatible with a variety of frame fitments - See Fit Guide at https://www.mrpbike.com/race-axles/ View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status 4 Available to ship or pickup in 2-3 Business...
Out of stock
Original Cannondale Axle Adapter X12 SI12 - KP174Allows use of 135mm wheel in the new 142mm frames such as the Jekyll, Claymore, and Scalpel 29er. View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status Currently not availableUPC: 884603362853 EAN: Not available Manufacturer...
-13%
Out of stock
Original Cannondale CZero replacement axle made from steel. Many original axles were aluminum and failed between the freehub body and hub shell. This steel replacement is much stronger. Does not include required endcaps or adapters. Length: 123mm as pictured Weight: 69 grams View similar items in these related categories Frame...
-11%
$25.00
$28.00
Original Cannondale rear thru axle for Syntace M12x1.0 setups requiring 168mm overall length. Kit includes one axle. Used on Trail Neo Peformance Gen 2/3, Tesoro Neo X Gen 2/3, Canvas Neo Gen 2/3 and others. 148x12mm frame rear axle spacing Overall length: 168mm Max torque: 15 Nm View similar items...
$44.95
- Replaces QR thru-axles for a simple, lightweight and stiff alternative compatible with a variety of frame fitments - See Fit Guide at https://www.mrpbike.com/race-axles/ View similar items in these related categories Frame Parts > Thru Axles + Skewers Today's Stock Status 2 Available to ship or pickup in 2-3 Business...
$54.90
- Ratchet Wheel Mounting system is tightened by turning the lever clockwise - Lever can be positioned in desired location after tightening - Alloy axle and lever - Plug-in handle includes 6mm hex key and can be removed for added security and a clean aesthetic View similar items in these...
Out of stock
The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure. CNC-machined from 7000 series aluminum Designed to fit all current Salsa thru-axle frames For other frames, check with the manufacturer for compatibility and...
Out of stock
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. CNC-machined from 7000 series aluminum Designed to fit all current Salsa thru-axle frames For other frames, check with the manufacturer for compatibility and other specifications 6mm...
$39.95
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to...
Out of stock
Cannondale Gemini 12mm Axle - KF076
View similar items in these related categories
Frame Parts > Thru Axles + Skewers
Today's Stock Status
Currently not availableUPC: 680655483931 EAN: Not available Manufacturer Part Number: KF076 713780-Q0-Lnotassigned
