cannondale1567 Products
$20.39
Snap-on bottom bracket cable guide system for intererior/ exterior cable roughting in Cannondale SuperSIx EVO II. Today's Stock Status 3 Ready to ship or pickup ASAP from Utah UPC: 884603643532 EAN: Not available Manufacturer Part Number: KP409/ 712117-Q3-L14B04 View similar items in these related categories Cable Management > Bottom Bracket...
$37.00
Original Cannondale derailleur hanger for 2016+ SuperSix EVO models using a conventional cable actuated shifting system. This hanger has a cable housing stop built in. If you are using electronic shifting including Di2 and eTap, KP396/ is a better fit for your bike. Today's Stock Status 8 Ready to ship...
$37.00
Original Cannondale derailleur hanger for 2016+ SuperSix EVO models using an electronic shifting system. This hanger does not have a cable housing stop built in. If you are using mechanical shifting with a cable, KP395/ is the correct fit for your bike. Today's Stock Status 8 Ready to ship or...
$19.05
Original Cannondale frame grommet set for 2020 generation SuperSix EVO bikes but will work with many others. Kit includes 2 deep cable pass through, 2 deep blanks, one flat blank, and one flat pass through grommet. Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603791509...
-5%
Out of stock
Original Cannondale seat binder wedge kit. Kit includes wedge, threaded backing plate, and anti-seize grease packet. Frames with problems keeping the seatpost in place use version 2 of this kit, part number K26141. Today's Stock Status Currently not availableUPC: 884603791486 EAN: Not available Manufacturer Part Number: K26030 713728-Q0-L View similar...
-69%
Out of stock
Used Cannondale SuperSix EVO carbon frame and fork. Advise using thread together PF30 bottom bracket to reduce creaking on these frames. Has typical wear and tear from use, no significant blemishes. Please ask any questions about condition, compatibility, or fitment prior to purchase. Frame Material: Carbon Fiber Fork Included: Yes...
-50%
$500.00
$1,000.00
Cannondale SuperSix EVO carbon frame and fork disassembled from new bike. Advise using thread together PF30 bottom bracket to reduce creaking on these frames. Please ask any questions about condition, compatibility, or fitment prior to purchase. Frame Material: Carbon Fiber Fork Included: Yes Headset compatibility: IS42/IS47. Not included. Bottom bracket...
-5%
Out of stock
NOTE: KP155 and KP203 have been discontinued. They can be effectively replaced by combining K35028 AND KP156. Exact fit for many of these bikes. Complete replacement headset for all 2012-2016 SuperSix EVO series frames and tapered forks, as well as 2014-2017 Synapse carbon, CAAD10, and CAAD12. A dirty, worn, or...
-17%
Out of stock
Original Cannondale conical headset spacer used SuperSix EVO 1st and 2nd generation and some other bikes. This is the same piece used in (discontinued) complete headset kit KP203/. Flat plate required underneath, available separately as kit KP253/. Height: 25mm Outer diameter at bottom: 47mm Weight: 16 grams Finish: Gloss Carbon...
Out of stock
Original Cannondale front derailleur mount for second generation (2016-2019) SuperSix EVO frames. NOT A FIT FOR GEN 1- (2012-2015) frames. Look for KR046 for GEN 1. Kit includes one front derailleur mount and three rivets. Installation requires frame preparation and epoxy which is not included. Carbon fiber repair should be...
Out of stock
Original Cannondale bottom bracket grommets for 4th generation SuperSix EVO.
Kit includes two rubber grommets.
Today's Stock Status
Currently not availableUPC: 884603943229 EAN: Not available Manufacturer Part Number: K32142 714637-Q0-L40B02
View similar items in these related categories
Cable Management > Frame Cable Guides + Stops
Out of stock
Original Cannondale seatpost grommet for 4th generation SuperSix EVO frames to reduce grime and moisture ingress at the seatpost. Kit includes one rubber grommet. Today's Stock Status Currently not availableUPC: 196870004597 EAN: Not available Manufacturer Part Number: K26053 714446-Q0-L14D09 View similar items in these related categories Seatposts > Non-Round Seatposts...
-10%
$18.00
$20.00
Original replacement seatpost grommet for 5th generation Cannondale SuperSix EVO frames. Kit includes one plastic grommet as pictured. Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 196870078642 EAN: Not available Manufacturer Part Number: K26006 714863-Q1-L30B06 View similar items in these related categories Seatposts > Non-Round...
-80%
Out of stock
Used Cannondale SuperSix EVO Hi Mod carbon frame and fork. Paint damage at top of seat tube, fork blade, and on seatstay. Advise using thread together PF30 bottom bracket to reduce creaking on these frames. Bottom bracket, downtube cable guide, and derailleur hanger included. Frame Material: Carbon Fiber Fork Included:...
-68%
Out of stock
Used Cannondale SuperSix EVO Hi Mod carbon frame and fork. Advise using thread together PF30 bottom bracket to reduce creaking on these frames. Has some tire wear on inside of chainstay and paint chips at rear dropout. Frame Material: Carbon Fiber Fork Included: Yes Headset compatibility: IS42/IS47. Not included. Bottom...
-16%
$42.00
$50.00
Original Cannondale seat binder wedge kit. Version 2 adds teflon tape to reduce noise found on some frames. Kit includes wedge, threaded backing plate, and piece of self-adhesive teflon tape. Today's Stock Status 2 Ready to ship or pickup ASAP from Utah UPC: 884603928585 EAN: Not available Manufacturer Part Number:...
-17%
$15.00
$18.00
The Cannondale SuperSix EVO Rim Di2 Headtube Wire Guide (K32030) is a genuine replacement part designed specifically for routing electronic Di2 shifting wires on SuperSix EVO rim brake models from 2020 to 2022. It facilitates internal Di2 cable management through the headtube of the bike frame, ensuring clean routing without...
$16.14
This top plate comes with the SuperSix Evo headset and sits on top of the upper bearing. It goes underneath the conical spacer unless you are taking that off and are slamming that stem. Compatible with SuperSix Evo, CAAD9, CAAD10, CAAD12, CAAD13, and Synapse Carbons models after 2014. This piece...
$32.00
Original Cannondale seatpost binder wedge assembly for SuperSix EVO v4 bikes.
Today's Stock Status
1 Ready to ship or pickup ASAP from Utah
UPC: 196870178854 EAN: Not available Manufacturer Part Number: K26083 714452-Q1-L23D04
View similar items in these related categories
Frame Parts > Cannondale Seatpost Wedge
Out of stock
Original down tube cable guide for 2020 generation SuperSix EVO and CAAD13 bikes. Kit includes blank cover plate, round cover plate, cable stop plate, round support, and two mounting screws. Round plate is used for Di2 configurations. Today's Stock Status Currently not availableUPC: 884603791448 EAN: Not available Manufacturer Part Number:...
Out of stock
Original Cannondale SuperSix headset carbon conical spacer from Cannondale headset kit KP044/. Must be used with flat base plate which is not included in this kit. 1-1/8" steer tube diameter. Height: 30mm Outer diameter at bottom: 52mm Weight: 26 grams Finish: Gloss Carbon Today's Stock Status Currently not availableUPC: DOES...
-50%
Out of stock
Used fork from a Cannondale SuperSix High Modulus bike. Shows signs of use. Sound mechanical condition. Steer tube length: 229mm Steer tube style: 1 1/8" to 1.5" tapered, full carbon fiber construction Weight: 335 grams as pictured Contact us with any questions before purchase about condition, compatibilty, or other needs....
Out of stock
Original Cannondale headset crown race for 1.5" tapered SuperSix and SystemSix steer tubes. This is the same one included in headset KP044.
Today's Stock Status
Currently not availableUPC: 680655016474 EAN: Not available Manufacturer Part Number: QC777/ 712537-Q0-L
View similar items in these related categories
Headsets > Headset Crown Races
-15%
Out of stock
Original Cannondale fork that came stock on the SuperSix frame. Has 1-1/8 to 1 1/2 inch tapered steerer tube that has not been cut so that you can customize the length for you. Does not include crown race. Model: Cannondale SuperSix Steerer cut to: 295 mm Steerer material: Carbon Fiber...
-15%
Out of stock
Original Cannondale fork that came stock on the SuperSix frame. Has 1-1/8 to 1 1/2 inch tapered steerer tube that has not been cut so that you can customize the length for you. Does not include crown race. Model: Cannondale SuperSix Steerer cut to: 295 mm Steerer material: Carbon Fiber...
-8%
$300.00
$325.00
Original Cannondale seatpost for Superslice bikes. Adjustable head is compatible only with round rails with included clamp. Highly adjustable fore and aft for proper fit on Superslice. Weight: 228 grams as pictured Overall length of post: 328mm Post Cross Section Size: 39mm x 13mm Today's Stock Status 1 Ready to...
-10%
$36.00
$40.00
Original Cannondale rear thru axle for Cannondale SuperSlice bikes. Kit includes one axle and one stainless steel washer. Fork Axle Spacing: Axle Diameter: 12mm Thread Pitch: Syntace 1.0 Overall Length Including Threads: 122mm Today's Stock Status 2 Ready to ship or pickup ASAP from Utah UPC: 884603674888 EAN: Not available...
$35.00
Original Cannonale seatpost binder wedge assembly for SuperSlice.
Today's Stock Status
1 Ready to ship or pickup ASAP from Utah
UPC: 884603674901 EAN: Not available Manufacturer Part Number: CK0077U00OS 714451-Q1-L44D06
View similar items in these related categories
Frame Parts > Cannondale Seatpost Wedge
$50.00
Maxle front axle for Cannondale 2017+ SuperX thru axle. 5mm hex wrench interface is simple, clean, and lightweight. Kit inclues one axle as pictured. Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603671214 EAN: Not available Manufacturer Part Number: KP457/ 713788-Q1-L17D05 View similar items in...
$90.00
Original Canondale headset for 2017 generation SuperX with Si headtube and 1.5" to 1 1/8" tapered fork. Kit includes: Lower Si to 1.5" bearing Upper headset reducer cup Upper headset bearing 23mm tall carbon fiber conical spacer Three microspacers Upper bearing wedge Compression assembly Today's Stock Status 10+ Ready to...
$60.00
Original Cannondale integrated seat binder wedge kit for 2017+ SuperX cyclocross bikes and 2018+ Synapse Carbon Disc road frames with 25.4mm seatpost diameter. Kit includes one wedge kit as pictured. Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603671122 EAN: Not available Manufacturer Part Number:...
Out of stock
Complete replacement headset for SuperX series frames and tapered forks. A dirty, worn, or damaged headset can make for a scary ride! Get the original Cannondale SuperX headset and get your steering back under control. If you are getting creaking and clicking, clean up that headset. You may even need...
-60%
$240.00
$600.00
Original Cannondale fork for SuperX disc carbon cyclocross bikes. Uses post mount disc brake. Uncut 1 1/8" to 1 1/4" tapered steer tube. Does not include crown race. Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: DOES NOT APPLY EAN: Not available Manufacturer Part Number:...
$15.91
Original Cannondale hydraulic hose and derailleur housing rubber plug grommets for bikes with internally routed brake hoses such as 2017+ SuperX and EVO Disc. Works with derailleur housing on a variety of bikes too. Kit includes one single hose guide as pictured. Today's Stock Status 5 Ready to ship or...
Out of stock
Rubber spool-shaped grommets go into some swingarms that featured full housing running through them. This prevents the housing from getting sliced when the suspension cycled and the housing rubs on the hole. When your grommets get worn or brittle or lost, replace them with these original Cannondale parts. We have...
Out of stock
Original Cannondale factory swingarm main pivot bolt kit for all Rush and Prophet full-suspension frames. Kit includes black bolt, two silver shaped washers, and black nut. Need new main pivot bearings? Use part number KB61902, the same bearing as the Lefty hub outer bearing. Today's Stock Status Currently not availableUPC:...
Out of stock
Original Cannondale chainstay protector for the 2014 generation Synapse Carbon rim and disc frames. This self adhesive replacement piece helps protect the frame when chain gets sucked down between the frame and the chainrings. View similar items in these related categories Frame Protection > Cannondale Frame Protectors Today's Stock Status...
$27.80
Replacement bolt and wedge kit for the Cannondale Synapse Disc 2014-2017, Synapse Rim brake 2014-2019 with 25.4mm seatpost. Not for 2018 to present Synapse Disc frames. This is a new frame design requiring part number KP448. Today's Stock Status 2 Ready to ship or pickup ASAP from Utah UPC: 884603534670...
Out of stock
Original Cannondale adjustable fender bridge for 2018 generation Synapse Carbon and Synapse alloy frames.
Kit does not include mounting hardware.
Today's Stock Status
Currently not availableUPC: 884603691168 EAN: Not available Manufacturer Part Number: CK1168U10OS 712594-Q0-L
Out of stock
Original Cannondale headset for 2018 generation Synapse carbon frames. This headset fits frame sizes 51cm and 54cm. Use kit K35018 for 44 and 48cm frames. Use kit K35028 for 51 and 54cm frames. Use kit K35038 for 56, 58, and 61cm frames. Note: This headset is a great replacement for...
$70.00
Original Cannondale headset for 2018 generation Synapse carbon frames. This headset fits frame sizes 44cm and 48cm. Use kit K35018 for 44 and 48cm frames. Use kit K35028 for 51 and 54cm frames. Use kit K35038 for 56, 58, and 61cm frames. Headset includes: Carbon conical spacer Flat alloy top...
Out of stock
Original Cannondale headset for 2018 generation Synapse carbon frames. This headset fits frame sizes 56cm, 58cm, and 61cm. Use kit K35018 for 44 and 48cm frames. Use kit K35028 for 51 and 54cm frames. Use kit K35038 for 56, 58, and 61cm frames. Headset includes: Carbon conical spacer Flat alloy...
$25.36
Original rear brake adapter for Cannondale Synapse Disc. Works with 140mm rotors. Fits 2014-2017 models for Shimano brake calipers. Kit includes brake adapter, two bolts, and two washers. Today's Stock Status 1 Ready to ship or pickup ASAP from Utah UPC: 884603568330 EAN: Not available Manufacturer Part Number: KP318/ 712364-Q1-L16G06...
Out of stock
Original Cannondale downtube cover for Synapse Carbon frames.
Kit includes one plastic cover and two mounting bolts.
Today's Stock Status
Currently not availableUPC: 884603929230 EAN: Not available Manufacturer Part Number: K34621 714322-Q0-L14C05
View similar items in these related categories
Frame Protection > Cannondale Frame Protectors
-27%
Out of stock
Cannondale Synapse Carbon Fork SAVE Technology Color: Green, White, and Black 1 1/8"
Uncut steer tube
Today's Stock Status
Currently not availableUPC: DOES NOT APPLY EAN: Not available Manufacturer Part Number: SYNAPSEFORK/GRN 711808-Q0-L
Out of stock
Original Cannondale road fork with the SAVE micro suspension technology. Matte black finish with Carbon weave texture showing. 1-1/8 inch diameter steerer 189mm steerer Includes removable crown race Today's Stock Status Currently not availableUPC: DOES NOT APPLY EAN: Not available Manufacturer Part Number: SAVE189 711809-Q0-L View similar items in these...
Out of stock
Get the original Cannondale SAVE seatpost that came on 2012 Synapse Carbon bikes. This new seatpost is compatible with 2009-2012 Synapse Carbon frames. This new modular system of a separate post and clamp allows you to easily tune the ride and fit. The post is available in soft (originally stocked...
Out of stock
This small rubber wedge will keep all kinds of muck and grime out of the seatpost clamp area on your new Synapse Carbon while still allowing access for seat height adjustment. Today's Stock Status Currently not availableUPC: Not available EAN: Not available Manufacturer Part Number: KP301/ 711761-Q0-L21F04 View similar items...
